PHOTOPLASMA Technology

BIOSUN PHOTOPLASMA Technology

BIOSUN's proprietary PHOTOPLASMA technology uses specially engineered light sources operating at selected wavelengths to activate surrounding water (H2O) and oxygen (O2) molecules. The resulting reactive species interact with pollutants, including formaldehyde, volatile organic compounds and biological contaminants. Treatment performance depends on the equipment, target contaminant and operating conditions.

Technology Features

01

Disinfection Applications

Designed for air treatment and disinfection applications.
02

Microbial Treatment

Applications may include microorganisms on surfaces such as desks and door handles, subject to the applicable equipment and test conditions.
03

Active Air Treatment

Active treatment for dynamic air environments.
04

HVAC Microbial Control

Treatment of microbial contamination on HVAC fan-coil units to support system operation.
05

Multiple Pollutant Targets

Applications address pollutants such as formaldehyde, benzene, cooking-fume particles, TVOCs and PM2.5, with performance assessed for the selected system and conditions.
06

Low Power Options

Power ratings range from 13 W to 100 W, depending on the model. Refer to the product documentation for emissions and operating specifications.

Third-Party Laboratory Reports

Influenza Virus (H1N1) Test

30-minute test — see original report
Guangdong Entry-Exit Inspection and Quarantine Bureau — National Sanitary Treatment Safety Laboratory
Airborne Bacteria / Staphylococcus albus Test

30-minute test — see original report
Chinese Center for Disease Control and Prevention
Microbial Reduction Test

30-minute test — see original report
Chinese Center for Disease Control and Prevention
Air Treatment Test

Reported result: ≥95% within 3 hours
China National Analytical Center, Guangzhou
Benzene Reduction Test

Reported result: ≥95% within 2 hours
Shenzhen Metrology Verification Station, AQSIQ
TVOC

Reported result: ≥95% within 2 hours
Shenzhen Metrology Verification Station, AQSIQ
Formaldehyde Reduction Test

Reported result: ≥95% within 2 hours
Shenzhen Metrology Verification Station, AQSIQ
Safety Test Documentation

Shenzhen Metrology Verification Station, AQSIQ
Fire Safety Test Documentation

DMT, Germany

Certificates, technical diagrams and report images are original source documents. Laboratory results apply to the conditions specified in the corresponding reports.